Stand-Alone Card Using Two Red Robins Wifflewood Friends Collection By Kath W
You will need:
- Two Red Robins Wifflewood friends collection
- White card
- Construction acetate
- Red-liner tape
- Glue
- 3D glue gel
- Scissors
- Scoreboard
-
- Step 1 Print the reflections onto Craft Master 250GSM Pure Print, and die-cut with coordinating dies.
-
- Step 2 Cut from white card stock using the outer dies 1 of the rabbits, and 5 sprouts. Step 3 Use a straight edge (ie edge of table/work surface), place the white die-cuts along the bottom edge to create the card shape (see photo).
-
- Step 4 Lay the reflections onto the blank pieces, when you are happy with the position, carefully remove the reflections.
-
- Step 5 Add small amounts of glue, just enough to catch the edges of each white die-cuts, and hold in place until adhered. Step 6 Add 3d glue gel to the back of the sprout reflections, starting at the top Of the card base, gradually work your way down.
-
- Step 7 Add the rabbits, then the other characters see (photo for reference).
-
- Step 8 Cut a piece of acetate approximately 4.5” x 4.5”. Score at the top at 1/2”, add red-liner tape along the edges, line the card bottom with the bottom of the acetate, and remove tape, then stick in place.
-
- Your card is complete!
I hope you enjoy this tutorial! Happy crafting from Kath W.
Leave a Reply
Want to join the discussion?Feel free to contribute!