Make An Easy Box Frame With The Be Pawsitive Collection!
Hello crafters today I’d like to share with you an easy 3-D box frame decorated with the cute adorable dogs from ITS be Pawsitive collection.
You will need:
In The Studio Be Pawsitive collection
3-D frame number 4
Background paper 138
Both printed from All About The Boys download
Scissors
Glue/glue gel
Scoreboard
Craft Master Premium Pure Print 250gsm Card
A4 black card stock
Red gingham ribbon /bow
-
- Step 1 Start by printing the items for this project, I used 250gsm premium pure print as it is a good weight for constructing the 3d frame and the colours pop with vibrancy.
-
- Step 2 Cut out 3D box using scissors, place on scoreboard and score the dash lines that are marked on the box, cut the inner corners marked with solid line up to the dash line, fold and sore lines to form the box. Step 3 Cut the black and white patterned card down to 6”x 8 1/4” and glue the frame on top, cut 2 strips of the black and white patterned paper at 5 3/4” x 1/2” and 2 at 3 1/4” x1/2” Glue to inner edges.
-
- Step 4 Scored and fold a piece of black A4 blackbcard stock in half to make an A5 tent fold, glued to the back of the box frame your card will now stand.
-
- Step 5 Cut out 1 of each of all the dogs from the be Pawsitive Collection glue in position using glue gel or foam pads (see picture below).
-
- Step 6 Make a bow using red gingham ribbon attach to bottom centre of the front of the card add a sentiment of your choice and your card is done! You can also create these box cards using the craft master box card templates available from the website.
Leave a Reply
Want to join the discussion?Feel free to contribute!